SF10A electric exchange oil heating single facer

It adopts hood suction structure with high pressure strong fan. The air suction is equipped with silencing device. The air source and electrical control are concentrated in the same operation cabinet. The distance from the main engine is not less than 1.5 meters. The operation side is fully enclosed and covered.

The thickness of the wall panel is 130mm.

The corrugating roller is made of 50crmo alloy steel. After quenching and tempering, medium frequency quenching and surface polishing, the main corrugating roller has a diameter of 292mm and a surface hardness of more than hrc58. The high temperature bearing produced by Wafangdian is used for the bearing of key parts of tile roll and pressure roll.

The gluing unit can be moved out horizontally as a whole. It is easy to disassemble and maintain. The cylinder controls the glue feeding and retching action. The copper plate scraping is clean. The electric rubber baffle controls the glue width. The angle sensor, PLC and touch screen are used. According to different paper, different speed automatic control glue quantity, no accumulated error.

The preheating roll is made of 320mm seamless steel pipe produced by Tiangang.

The pressure roller can stop and rotate automatically, and the transmission part is driven by synchronous belt.

The gear box universal shaft transmission is adopted, and the gear is hardened by high frequency quenching. Oil lubrication, life-long. Variable frequency motor speed regulation, energy saving and high efficiency.