SF320E cassette type single facer

The main corrugating roller: ￠ 320mm (different according to the different types), the pressure roller ￠ 370mm, and the preheating roll ￠ 400mm.

The negative pressure design with low heat loss makes the core paper uniformly pressed and attached to the surface of the corrugating roller, so that the corrugated can be better formed. Because the pressure is uniform, the top of the corrugated can be better coated with glue, so that the single-sided corrugated paper can fit better.

The whole set of corrugating rollers are put into the machine and fixed on the base of the machine. Only one button switch is needed to replace the corrugating rollers quickly.

The corrugating roller is made of 50crmo high-quality alloy steel, which is quenched and tempered, medium frequency quenched, ground and then treated with tungsten carbide. The surface hardness is more than hv1200 degrees.

The air bag control system with high stability is adopted for corrugated roller and pressure roller, and the air pressure control buffer effect is also available.

The gluing amount is controlled by electric adjustment, and the glue separating device is electric. The gluing system can operate independently when the main machine stops, so as to prevent the glue from drying up.

The mobile gluing system is convenient for cleaning and maintenance.

The simple operation control system, touch screen operation interface, and color graphic display of operation status, function selection, fault indication, troubleshooting and parameter setting all show that the machine has complete functions, simple operation and humanization.

The built-in preset adjuster has a spray system to adjust the temperature and moisture content of the core paper.

The bearings of main and auxiliary corrugating roller and pressure roller are all made of high temperature grease to ensure the bearing life and smooth operation.