13 Precautions for Operating The Printing Slotting Carton Machine

13 Precautions for Operating The Printing Slotting Carton Machine

1. The operator of the carton machine is familiar with the structure, working principle and operation method of the carton printer slotter.

2. The carton machine operator is allowed to wear gloves for operation. The female worker's hair should be curled up. It is not allowed to wear too loose clothes. It is not allowed to touch the belt, transmission part, blade, etc. to prevent personal injury.

3. Before starting the carton printer slotter, check whether there are tools or other sundries on the paper feeding table. When starting the carton machine, press the bell first, and the carton machine can be started only after receiving the response from other operators of the machine. If you do not drive after pressing the bell, you should press the bell again after a period of time, and then run after confirmation. It is not allowed to start the machine directly at high speed. It is necessary to start from zero speed and gradually reach the rated working speed through the speed knob.

4. The slotting part should be operated according to the procedure. The notches of the slotting knife and the paper separator are very sharp, which is very easy to hurt hands; The upper knife of slotting should fall in the lower knife slot, at the middle position. After adjusting the knife, lock the fastening screw, and pay attention to putting the paper shoveling knife into the paper shoveling slot. Remember to lock the fastening screw after the four-knife linkage is adjusted. After each part is adjusted and locked, turn the grooving part several times with the handle. If there is no abnormality, continue the operation. When the equipment is running at high speed, it will touch the sharp edge of the knife if you don't leave your hands behind. Be careful. During production, it is very easy to cause injury accidents if the operation regulations are violated.

5. When pasting, erasing, knife adjustment, dirt, foreign matter, paper or wiping the machine, the starting power should be turned off and the carton printing machine should be stopped, and the people around should be reminded to prevent others from opening it by mistake. www.chinacartonmachine.com

6. When changing or washing ink, do not touch the rotating part of the machine with your hands, and do not wipe the stains on the ink roller with a rag;

7. The anilox roller, rubber roller and plate roller are the heart of the printing machine. There should be no foreign matter rolling in and scratches. They should be cleaned before work.

8. When the unit is closed and locked, pay attention to the gear bite and whether there are foreign matters or people in the middle.

9. Regularly refuel, and do not cut off oil or work with less oil.

10. All parts of the carton printing machine should be kept clean, and should be cleaned in time after work to avoid wearing parts.

11. In case of abnormal noise during the operation of the machine, the machine shall be stopped immediately for inspection, and can be restarted only after the cause is eliminated.

12. The safety device on the equipment shall be kept sensitive and reliable at all times, and shall not be removed without authorization or adjusted manually to make the device lose its function. If it is damaged, it shall be repaired in time;

13. The carton machine appearance, electrical control cabinet, electrical devices and electrical components should be kept clean, and the components should be regularly checked for looseness and aging, and hidden dangers should be eliminated in time; Cut off the power supply during commissioning and maintenance.