High speed stitching box machine

 High speed stitching box machine

How to choose pedal high speed stitching box machine, there are mainly three ways to carton corrugated boxes: stitching synthetic boxes, glued boxes, folding boxes. Folding boxes are mainly used in small packages, special cartons and cartons. At present, the most widely used in the conventional carton molding is the stitching thread synthetic box. The stitching box machine is the key equipment of the stitching synthetic box. The type and characteristics of the existing stitching box machine: the foot type manualstitching box machine: this kind of nail box machine is the earliest type of stitching box machine, widely used in the domestic small and medium carton packaging enterprises. Its characteristic is: because the structure is simple, the price is cheap. The average price is 3800 - 8000 yuan per unit. Its structure is shown in Figure 1: mainly consists of nail head, bracket arm, driving motor, transmission clutch, fuselage and foot switch. The driving motor is usually 0.5 kilowatts, which adopts single or double grade triangle belt speed transmission power, and has only one speed ratio with the motor. When working, the motor operates, but when the foot switch is not stepped on, the transfer of the clutch does not move, the nail head does not nail, the nail box is needed, the paperboard is built manually, the switch is disconnected to connect the nail head, and the nail is circulate. The more complicated parts of this machine are nail heads and mechanical clutch. The most important part in the head is the punch. As the punch moves up and down, in a very short period of time (about half a second), it completes the 4 process cycle of entering the line (including cutting) pressure, punching, and suspension. Because the speed, acceleration and residence time of the structure design are different, the time and the damaged parts are different, so it is made for manufacture. Business brings a certain degree of difficulty. The punch reciprocating mechanism has 3 forms: cam, eccentric wheel and eccentric shaft. The cam type is also called the groove wheel. The disadvantage is that the machine is a little difficult to process. The parts of the machine head are relatively more parts. Although some vulnerable parts are small, they must be selected well. After the corresponding heat treatment process, the endurance is improved and the service life is prolonged. Maintenance should always be lubricated and kept clean. When choosing this kind of machine, it mainly depends on the manufacturer's nail head, fuselage processing material and processing technology and assembly level. www.chinacartonmachine.com

The recent development of high speed nail box machine products. It improves the structure of the nose. It uses electromagnetic clutch control brake, and has the advantages of fast nail speed, flexible braking, and low noise. It is suitable for carton boxes to make corrugated boxes and cartons. At the same time, it can tilt the large, medium and small cartons on single or double lines at 45 degrees.

The stitching box machine has good effect, the stitching box quality is obviously improved, the nail type is beautiful, the arrangement is neat, the production efficiency is increased by 50%, and the most important thing is to reduce the cost. The improved directional machine has higher performance and higher price.