Analysis of Common Faults of Carton Die-Cutting Machine

Analysis of Common Faults of Carton Die-Cutting Machine

Maintenance of the carton machine is what every operator should do. Because the maintenance of the carton machine is not good, it will increase the maintenance cost and increase the enterprise expenditure; Second, it will cause great damage to the carton machine and shorten the service life of the carton machine; The three factors affect operation and delay production. The carton machine failure will definitely affect the operator's mood and delivery time. www.chinacartonmachine.com

After that, the common faults of the carton die-cutting machine should be eliminated in time. In terms of machinery, the common failure of the automatic flat-pressing die-cutting carton machine is the phenomenon of platform tilting. In this case, most foreign matters fall into the die-cutting place. Generally, the position of the two wedge-shaped blocks under the shaft rod should be dragged, and the platform should be rotated to the upper point at the same time. At this time, check the relative position of the upper net platform and the distance between the four angles of the moving platform and the upper net platform (where the die cutting plate is clamped). This will solve the problem. The electrical faults are as follows: because the central control system of the automatic carton die-cutting machine uses programmable logic controller (PLC), the electrical switch and output action of the main detection point are all started from this, and the internal program of PLC is ladder logic diagram.