Failure analysis of carton die cutting machine

1. carton die cutter version of its failure.

Die cutting machine failure, it is possible to die cutting tool version itself is the process of making a slight error, this slight error so that die cutting can not absolutely achieve the ideal die cutting indentation position. Die cutting, indentation and printing work environment is different, it will cause cardboard fiber deformation or stretching, but also lead to die cutting indentation is not allowed. What needs to be done is to guarantee the die cutting indentation as much as possible to ensure the identity of the working environment. Now, the die cutter version is mainly made by hand plate making and laser plate making in two ways. Compared with laser plate making, the precision is relatively high. Design and cutting are finished by computer and machine. It is suitable for die cutting of high grade packaging. www.chinacartonmachine.com

2. the rules of cardboard are different.

All die cutting machines are not precision instruments, and it will produce error in itself. If we want to improve the precision of die cutting indentation, we must choose the die-cutting machine with relatively high precision. Mentioned above manual plate making method, the technical requirements of the plate maker is very high, and the plate making because of environmental factors such as different, also can make plate making quality affected. Therefore, the manual plate making machine is suitable for short and medium packing with low precision requirement. Therefore, we say, to get a good die cutting accuracy, you must choose advanced plate making method. For example, if you check the mouth of the cardboard specifications error, cause this may be the die machine after the positioning, pulling distance is too small. In this case, we can solve the problem by increasing the distance from the rear position.

3. indentation and printing on the site is not.

Method to solve the fault according to the requirement of the product is very simple, as long as the recalibration of die, adjust the printing and die-cutting indentation location. It can also be adjusted by adjusting the positioning of the conveying side of the paper.

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *