Comprehensive transformation of corrugated cardboard production line

Transformation of corrugated board production line:

Contact bar: sizing machine is the traditional form of pressure roller to complete the corrugated paper sizing, and then adjust the clearance of roller and roller sizing, corrugated paper sizing gap. Therefore, there are the following defects: one is because the gap is smaller than the free state corrugated height sizing by corrugated paperboard compression, deformation. Bursting affected; two is due to the glue line and is not too wide, and in addition to top and position sizing corrugated side corrugated pulp, so after bonding cardboard there are different degrees of collapse, open pit, bending phenomenon, but also a serious impact on the side pressure strength of cardboard, but also to the post the procedure of processing inconvenience; three is due to processing (including roller, roller etc.) www.chinacartonmachine.com  the runout, also affect the uniformity of corrugated cardboard sizing, easy to cause blistering, poor adhesion phenomenon. Contact bar installation and use, not only can completely change The occurrence of the above undesirable phenomenon, improve the quality of cardboard, and because of the size of the reduction of the amount of glue, improve the speed of the cardboard line, thereby further improving the production efficiency, reduce production costs

The trap of corrugated board production line drainage system of the traditional form, most of the batch, is not conducive to continuous production under the condition of heat demand, through efficient traps developed by our company, not only to meet the continuous production of cardboard production line into heat demand, and compared with other products, can reduce the energy consumption, long service life, at the same time due to a back pressure, can improve the heating temperatures in the region.

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *