Comprehensive transformation plan of corrugated cardboard production line

After the corrugated cardboard production line using a time, accompanied by the wear of equipment spare parts, production efficiency will be greatly reduced; the cost of production will be improved, such as improving energy consumption, reduce production speed, increase the amount and cannot be corrugated sizing; ensure that the best sizing position in the cardboard, collapse, compressive strength, wear resistance can not be at the same time to meet customer requirements, the hot plate (baking) change of flatness also affects the heat exchange; drainage system due to wear and tear caused by loss of steam up, or because the normal drainage plug caused by site of heating temperature can not guarantee the phenomenon. To solve the above problems, our company invested a lot of manpower, continue to explore, study, sum up experience the lesson, obtained a set of transformation board production line project, the relative purchasing new paperboard line, less investment, quick effect, can achieve immediate effect. Corrugated board production line Transformation:

Contact bar: sizing machine is the traditional form of pressure roller to complete the corrugated paper sizing, and then adjust the clearance of roller and roller sizing, corrugated paper sizing gap. Therefore, there are the following defects: one is because the gap is smaller than the free state corrugated height sizing by corrugated paperboard compression, deformation. Bursting affected; two is due to the glue line and is not too wide, and in addition to top and position sizing corrugated side corrugated pulp, so after bonding cardboard there are different degrees of collapse, open pit, bending phenomenon, but also a serious impact on the side pressure strength of cardboard, but also to the post the procedure of processing inconvenience; three is due to processing (including roller, roller etc.) the runout, also affect the uniformity of corrugated cardboard sizing, easy to cause blistering, poor adhesion phenomenon. Contact bar installation and use, not only can completely change The occurrence of the above undesirable phenomena, improve the quality of cardboard, but also due to reduced sizing, saving glue, improve the speed of cardboard line, thereby further improving the production efficiency and reduce production costs. www.chinacartonmachine.com

The trap of corrugated board production line drainage system of the traditional form, most of the batch, is not conducive to continuous production under the condition of heat demand, through efficient traps developed by our company, not only to meet the continuous production of cardboard production line into heat demand, and compared with other products, can reduce the energy consumption, long service life, at the same time due to a back pressure, can improve the heating temperatures in the region.

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *