Carton slitting scorering machine need to do preparatory work before starting

Carton slitting scorering machine need to do preparatory work before starting
According to the provisions of the oil to the lubricating parts of oiling machine.
The inspection machine, single-sided machine button, button, check whether the foreign body on corrugated roller.
Open the machine power supply and air compressor power supply, close the bypass valve, so that the machine to preheat. Steam preheat the machine reach 2Kg ~ 3Kg, the corrugated roller slow, to prevent deformation between machine idling, tile roller pressure can not exceed 3Kg; pressure roller, corrugated roll can not give pressure to avoid wear; after a slow start, and must be in Leng dripped a small amount of low viscosity oil.
The plastic tray to the desired position, the clutch, the idle rollers
The open inlet valve and the back paste paste paste motor, check status of binder circulation
 

The preparation condition and confirm the paper display data line, will promote paper base paper frame drum placed before peeling paper placed incomplete part cannot be used in the paper; surface must face anyway apart, kraft paper and corrugated bonding requirements of negative, positive and negative for corrugated paper don't separate.
The steam pressure in the 9kg ~ 10kg, the surface temperature of production in 170 to 190 DEG c..