Flat Wire Affects The Life of The Carton Stitcher

 Flat wire affects the life of the carton stitcher

Workers often complain that the flat wire is prone to cracks, rust spots, peeling, bending and other quality defects during the operation of the carton stitcher, and will rust when storing the flat wire. In fact, as long as you follow these three steps, these problems can be avoided and the life of thecarton stitcher can be greatly extended

The carton stitcher pays attention to the scientific storage of flat wires, which can not only optimize the production capacity of carton stitcher, but also better ensure the quality of nail boxes.

1. Choosing copper flat wire can improve the service life of the carton stitcher

The quality of flat wire mainly depends on the performance of raw materials and production process. If the wire material of the flat wire is unqualified, it is easy to have quality problems such as coating falling off, uneven line, broken nail, and poor nail stitching. The cooling temperature of iron flat wire is about 400 ° C and the time is only 4 hours, while the cooling temperature of copper flat wire is about 900 ° C and the time is about 14 hours. The hardness is about twice that of the former, so the wear of the head parts can be reduced better when using. Therefore, from the perspective of improving the service life of the equipment, it is significant to select copper flat wire. www.chinacartonmachine.com

2. The purchase of elastic flat wire can reduce the cracking of the carton stitcher.

Copper and zinc plating on the surface of the flat wire is generally used for both types. From the perspective of quality and technology, steel wires are not allowed to have quality defects, such as cracks, rust spots, peeling, bending or uneven thickness. Therefore, pay attention to purchasing steel wires with good coating, good rigidity and elasticity. The uniformity of thickness and width can be tested with vernier caliper.

3. The drying and ventilation of the warehouse can prevent the carton stitcher from rusting.

The wire of steel wire is iron wire. Although the surface has a certain degree of oxidation resistance and rust prevention coating, it is easy to rust if it is not stored properly. Therefore, almonds that are not used after opening the packaging box should be sealed and stored against moisture. The warehouse where the loofah is stored must meet the basic requirements of ventilation, dryness, non corrosivity and oxidation, and the loofah cannot be directly placed on the ground, but should be placed on a wooden pad with a base of more than 375px to prevent moisture and rust.