carton stitching machine maintenance

Before the new stitching box machine in use, we must first carefully read the instructions, understand the basic structure of the equipment, performance and use of methods to avoid the blindness of operation. In the case of stitching box, adjust the position of the main baffle and the left and right baffles, and the position of the upper and the lower pin. Adjust, we must pay attention to the left and right baffle can not be too tight, but should be easy to insert and draw board for the appropriate. When the machine is adjusted, can touch screen computer settings: the original carton carton height = high 40mm, number of cartons, carton nail set distance, whether strengthening nails, single, double selection set, then only the nail box. At the same time, pay attention to the correct use of nail box machine, we should pay attention to the correct maintenance and maintenance of the machine, which is to improve the production efficiency and the quality of the nail box key link, must not be ignored. So, for every day to set machine head, a set of punch lubrication; head fixed axis, right baffle fixed axis, also used oil lubrication and cleaning at any time; and the nail head shaft, spline shaft, drive screw should maintain good lubrication; order due to head part plating chip flat wire feeding off and accumulate in the punch, should pay attention to regular cleaning and cleaning; every month after disassembled for head cleaning and oiling; 3 gear feeding belt around croze shaft plate, suitable for a month to add the butter once; clutch and brake device to prevent oil into the water, infiltration; servo motor should be kept clean, avoid dust accumulation; regular cleaning of the servo motor drive heat radiation filter; electric control box must be kept clean to prevent dust accumulation caused by internal short-circuit fault, Out of the line to pay attention to the use of grease to lubricate the wheels, so as to maintain the reliability of the flexibility of the power transmission of the gear and the chain requires a month of grease lubrication once, to prevent the wear of mechanical components. www.chinacartonmachine.com

 

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *