carton stitching machine daily maintenance knowledge

carton stitching machine daily maintenance knowledge
The key point to improve the production efficiency and the quality of the stitching box, must not be ignored, fault automatic stitching box machine is a low rate, high reliability, to pay attention to the correct use at the same time, should pay attention to the proper maintenance and maintenance of the machine to do. So it is required to perform the following operations on the machine every day:
To set the head, punch a lubricating oil; www.chinacartonmachine.com
After each month to open the head for cleaning and refueling;
The upper and lower nails head transmission shaft, the bolt groove shaft, the drive screw to maintain good lubrication;
 

The fixed axis of the fixed head and the fixed shaft of the left and the right baffle plates must be cleaned and lubricated when moving;
In order to head due to falling debris into the flat part of the electroplating and accumulate in the punch, should pay attention to regular cleaning and cleaning, open the nail head, put it back clean after refueling;
Clutch, brake to prevent oil, water into the infiltration;
Always clean the filter dust filter for the servo motor drive;
Electrical control boxes must be kept clean to prevent dust cover and cause short circuit faults;
Inside and outside the transmission line should pay attention to the use of grease lubrication, so that it will maintain a reliable flexibility;
3 gears, one month, one time, one month, one time, one time, one month is spread, and the left and the right baffle of the left and the right baffle of the feeding belt are;
Servo motor should be kept clean, avoid dust aggregation, should always be on the servo motor driver cooling filter cleaning
The gear and the chain of the power transmission box are required to fill the grease once a month to prevent the wear of the mechanical parts.