Operation of a printing slotting machine

1. operators of machines must be familiar with the structure, working principles and operation methods of the equipment.

2. machine operators, no gloves are allowed to operate, women's long hair should be set up, not too loose clothes, no contact belt, transmission part, blade and so on, to prevent injury.

3. before starting the machine, check whether there are any tools or other items on the feed table. Every time you turn on the machine, you must first press the bell to get the other operation of the machine. If you do not drive after you have finished the bell, you must press the bell again after a while, then confirm the safety and then run. The starting machine is not allowed to run at high speed directly. It needs to start at zero speed and gradually reach the rated speed through the speed knob.

4. the slot part, should be operated according to the program, the printing machine slotting knife and the paper cutter knife edge is very sharp, very easy to hurt the hand; slotting knife must fall in the knife slot, and the center position. After adjusting the knife, we must lock the fastening screws, and pay attention to putting the shovel knife into the shovel Paper slot. After the four knife linkage is adjusted well, we should remember to lock the fastening screws, and then turn the slotting parts with the handle. If there is no abnormal phenomenon, we can continue to operate. When the equipment is running at a high speed, it will touch the sharp knife without leaving the hand, so be careful. In production, if the operation rules are violated, it is very easy to cause injury accidents.

5. plate, eraser, knife, remove dirt, foreign object, paper or wipe machine, should be closed after the starting power stop, and remind the people around to prevent others from opening. www.chinacartonmachine.com

6. when changing the ink and washing the ink, do not touch the machine's rotating parts.

7. anilox roller, rubber roller and plate roller are the heart of printing machine. No foreign objects should be rolled into it, no scratches must be cleaned, and must be cleaned before going to work.

8. when the press is closed, attention should be paid to gear biting and whether there are foreign bodies or people in the middle.

9. regular refueling, do not cut off oil or less oil work.

10. all parts of the machine should be kept clean and should be cleaned in time to prevent corrosion and wear parts.

11. in case of abnormal sound in the operation of the machine, the machine should be stopped immediately for inspection.

12. the safety and insurance device on the equipment should be sensitive and reliable at all times, and should not be dismantled or adjusted artificially, so that the safety device will lose its function, if the damage should be repaired in time.

13. the appearance of the machine, electric control cabinet, electrical apparatus and electrical components should be kept clean, check the loose and aging phenomena of the components regularly, eliminate the hidden dangers in time, and cut off the power supply when debugging and repairing.

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *