Printing die cutting machine operation notes

Printing die cutting machine operating points

1, the machine needs to check operation:

Make ready check printing machine brush and die cutting version is removed, and then check out on paper ladder, the printing department, the die cutting part and outlet is clean, such as debris should be cleaned.

A, with a wrench to turn the drive shaft, so that the pressure of the reciprocating frame several times, to observe the phenomenon of card resistance. www.chinacartonmachine.com

B, motor and electrical parts of the dry insulation is good.

C, the safety protection switch is normal and reliable.

D, before operation need to inject lubricating oil.

E, check the various parts of the screw, nut is loose, if found to be resolved in a timely manner.

2, running:

A, check the equipment in the process of moving the brake is flexible.

B, after the power is turned on, press the motor start button, wait for the flywheel to rotate for a certain time, then the machine will be put into operation.

C, the base plate and the pressure plate to adjust the frame distance, the power should be cut off to ensure safety.

D, on the base plate and the pressing frame is prohibited to grab the paper plates.

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *