Maintenance of carton packaging machinery

Carton packaging machinery is suitable for continuous cleaning of various cartons. There are two types commonly used, 30 and 40. The heat source forms are coal or wood type and electric heating type. It is a common machine in carton processing. The maintenance and repair points are as follows:

1. Change the lubricating oil in the gearbox of the worm and worm of the carton packaging machinery. The lubricating oil can be No. 10, No. 20 or No. 30.

2. After all parts are assembled, start up and operate, and observe whether the machine operates normally. Heat the drum properly and put in a small amount of special oil for carton packaging machinery to melt and cover the inner surface of the drum, then cut off all power supply. Spray paint on the surface of the machine, cover with plastic paper after drying and store in a dry place.

3. If the chain is too loose, it can be adjusted by removing several sections first. If it has been seriously stretched, it should be replaced. When using the carton machinery, it should be used according to the amount method and principle, maintained and maintained according to the method, and solved the different fault problems in time. When adjusting and changing the chain, it should be noted that the installation direction of the spring card at the chain joint should be consistent with the running direction of the chain, so as to avoid impact, jump or even collision and falling off during the running.

4. Remove and clean all rolling bearings, and add new grease. Calcium sodium base grease can be used.www.chinacartonmachine.com

5. All dirt on the friction surface, especially the chain and sprocket, shall be cleaned and refilled with lubricating oil.

The maintenance and repair of carton packaging machinery requires technicians to carry out maintenance and repair, to ensure the use and performance of carton machinery, and to play an important role and value in the production of cartons.

 

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *