How to prolong the service life of carton machinery?

 How to prolong the service life of carton machinery?

Tip one, to change the lubricant regularly

The gearboxes, gearboxes, oils, and lubricants in carton packaging machinery must be replaced periodically, and 10#, 20# or 30# oils shall be selected according to the type of machinery and the actual requirements.

tip two, check the carton machine operation chain loose?

If the chain of carton packaging machinery is too loose, the most simple and effective adjustment method is to remove a few chains, to ensure that the operation will not appear loose. If it is already in short supply, it should be replaced in time. Adjust and replace the chain should be noted: the chain joint, the spring, the direction of the card should be in line with the direction of the chain in order to avoid running when the impact, beating, or even collision, fall off.

In the use of carton machinery, must be in the right way to operate, production and maintenance, timely settlement of different problems. www.chinacartonmachine.com

Tip three regular cleaning of bearings

When the carton packaging machinery to use for a certain period of time, all bearings should be removed for cleaning, and add new grease, calcium, sodium based grease, so that the use of machinery more favorable.

Tip four, when the machine production, pay attention to equipment, there is no smoke furnace

Check whether the furnace leaks smoke. If smoke is found, the ring gear will roll very well. Check the stove and chimney. If found damaged, repair and replace it. The electric model shall check whether there is any damage to the heating pipe. If there is any damage, replace it immediately to ensure the safety of the machine and the operator.

Tip five cleaning the carton machinery production facilities regularly

Remove dirt and rust on the mechanical surfaces of cartons, especially for cleaning chains and sprockets, and then refill the grease. Carton machinery maintenance and maintenance, and some maintenance technicians to maintain and repair mechanical cardboard boxes, to ensure the quality and performance in the carton production has played an important role and value.

Tip six, the carton machine after cleaning and maintenance, to correct assembly

After the maintenance of all parts of the mechanical equipment, re assembled, and then start running, observe whether the machine is normal. Appropriate heating roller, and a small amount of carton packaging machinery, the use of lubricating oil poured on the roller surface, and then cut off all power supply. When necessary, paint the whole machine. After the paint is dry, cover with plastic paper and store it in a dry place.

The user master carton machinery more than 6 operational know-how, prolong the service life of carton machinery, improve the production performance of machinery, machinery to ensure production efficiency, ensure product quality, enhance the economic benefits of the user!