Operating Rules of Carton Die Cutting Machine before Start-up

Operating Rules of Carton Die Cutting Machine before Start-up Operating rules before starting cartn die-cutting machine: Check the handover record to understand the operation of the equipment. After checking and confirming that there is no foreign body on the machine, the machine is thoroughly checked and adjusted. According to the production scheduling plan, check the quantity of die cutting and the quality of products according to the requirements of production construction orders. Operational specifications for die-cutting machine before start-up production: 1. Check whether the die cutting is the same size as the box sample. 2. Check whether the product has a mouth. 3. Choose the base plate material according to the quantity of products, paper type and carton structure. 4. Install the die-cutting plate and lock the fastening screw to prevent the die-cutting plate from loosening. Make the bottom plate. The thickness of the bottom plate is the paper thickness of the die-cut product. 5. Install the bottom template, clean up the surface debris and lock. 6. According to the thickness of paper, adjust the die-cutting pressure. When adjusting, the pressure should gradually increase from light to heavy to 80% penetration, otherwise it will cause equipment damage. 7. Adjust the position of the top and bottom pins of the stripping parts and lock them. 8. After adjusting the components, the production sample is required for the reference box sample, and no quality problems are checked. After the supervisor signs the sample, the normal production can be achieved. Operational Specifications for Die Cutting Machine Production: Work according to the production requirement of construction order and the standard of signature. During the production process, sampling inspection is conducted every 5-10 minutes, quality problems are reflected in time, and production can be continued after solution. If material problems are found, production should be stopped, and the "Feedback Form for Bad Quality of Production Materials" should be filled in, so that relevant departments can coordinate and solve the problems, so as to prepare for the follow-up production. After each die cutting, a comprehensive inspection should be carried out and the "die cutting process sheet" should be filled in. If quality problems occur, the products should be placed separately in time, and the "abnormal product flow sheet" should be filled in. Operational specifications for die-cutting machine after production: 1. The captain shall fill in the "Touch Daily Form", "Statistical Form of Process Quality" and "Daily Inspection Form of Production Equipment" every day. 2. Place the die-cut products separately according to qualified products and defective products, and mark them clearly. 3. At the end of production, the equipment should stop at the opening part. 4. Maintain the equipment according to the daily maintenance content. 5. Fill in the handover record carefully. 6. Turn off the power supply.