Safety operation procedure of automatic laminating carton machine

Full automatic carton laminator machine running speed, the match quality is good, but we are in the process of operation but also in accordance with certain steps, so that we can more effectively ensure the quality of products. Below we briefly introduce the safety operation flow of each boot:

(1) in accordance with the requirements before the boot to add the appropriate amount of lubricant to the parts.

(2) carefully check all fasteners, such as screws, handles and other parts whether there is loose or off phenomenon.

(3) carefully check each roller, whether there is sharp and other debris between the belt.

(4) the operating handle, the switch button, the adjusting device, the safety device is in the normal shutdown position.

(5) try to boot a few minutes, check the motion machine if there is abnormal sound phenomenon, check the emergency stop button is a sensitive and effective control. www.chinacartonmachine.com

(6) during operation, timing check motor, reducer, blower, electric control box operation is normal, if there is abnormal noise, leakage and other downtime immediately when troubleshooting before starting work.

(7) stop, will be around the back pressure roller, the feeding table is reduced to the lowest position.

(8) each operation handle, switch button, adjusting device, the safety device is placed in the normal position after the shutdown.

(9) cleaning roller, wipe clean, pay attention to the speed of the machine in low speed.

(10) shutdown switch off POWEROFF and control box side fuse EA-53B switch.

(11) the machine surface dust, oil, water and wipe clean, while the surrounding debris clean up and tidy up the tools

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *