Various standard operation procedures of carton die cutting machine

Operation procedures before starting the die cutting machine:

Check the handover records to understand the operation of the equipment.

Check and adjust the machine after checking and confirming that there is no foreign matter on the machine.

According to the production scheduling plan, check the quantity of die cutting and the product condition according to the production construction sheet.

Operation specification of die cutting machine before start-up production:

1. Check whether the die cutting is the same as the box sample size.

2. Check whether the product has a mouth.

3. Select the bottom template material according to the product quantity, paper type and carton structure.

4. Install the die-cutting plate and lock the fastening screw to prevent the die-cutting plate from loosening. Make the bottom template, the thickness of the bottom die is the thickness of the die-cutting product paper.

5. Install the bottom template, clean up the surface impurities and lock.

6. According to the paper thickness, adjust the die cutting pressure. The pressure should be increased from light to heavy to 80% penetration, otherwise the equipment will be damaged.

7. Adjust the position of the upper and lower thimbles of the stripper and lock them.

8. After adjusting the components, the sample sheet is required to be produced according to the box sample, and the normal production can be carried out after the sample is signed by the supervisor.

Operation specification in die cutting machine production:

Operate according to the production requirements and sample signing standards of the construction sheet.

In the production process, sampling inspection should be conducted every 5-10 minutes. If there is any problem, it should be reported in time, and the production can be continued after the problem is solved. If any material problem is found, the production shall be stopped, and the feedback form of production material defect shall be filled in to let the relevant departments coordinate to solve the problem, so as to prepare for the follow-up production.

After each version of die cutting, we should carry out a comprehensive inspection and fill in the die cutting process sheet. In case of any problem, the products shall be placed separately in time and the abnormal product flow sheet shall be filled in.

Operation specification of die cutting machine after production:

1. The captain shall fill in the daily report of touch cutting, statistical table of process status and daily inspection form of production equipment every day.

2. Place the die-cut products separately according to the qualified products and defective products, and mark them clearly.

3. At the end of production, the equipment should stop at the mold opening position.

4. Maintain the equipment according to the daily maintenance content.

5. Fill in the shift handover record carefully.

6. Turn off the power. Operation procedures before starting the die cutting machine: