Carton cutter

In the actual use process, the paper cutter faces a variety of cutting objects. In addition to paper and cardboard, there are leather, plastic, cork floor and PS plate. Due to the wide variety of materials to be cut, different paper press pressures should be used for different materials, and the angle of the cutting edge should also be changed to obtain the cutting products. www.chinacartonmachine.com

Cutting edge angle

The selection of cutting edge angle is a very important link in the cutting work. In other words, a good paper cutter should be equipped with a good paper cutter blade and sharpening process. However, we found in the after-sales service of the paper cutter that many users of the paper cutter often ignored this point. As a result, the impact force in the cutting process was increased due to the incorrect way, method and angle of the paper cutter blade grinding, which led to the looseness or even fracture of the safety screw and eventually caused mechanical damage.

The range of materials that need to be cut by paper cutter is becoming wider and wider, such as beer aluminum foil cap label, carbon free carbon copy paper, honeycomb cardboard, magnetic card, photographic film, etc. These materials will encounter different practical problems in the cutting process. For example, carbonless copy paper is prone to indentation during cutting, while magnetic card and photographic film may not be fixed during cutting, resulting in scrap. These problems can be solved successfully by adjusting the pressure of the paper roller, improving the blade and the cutting transmission system.

Inquiry for Our Product

When you contact us, please provide your detail requirements.
That will help us give you a valid quotation.

1. Your Name *
2. Your E-mail *
3. Message *